20
3. CLEANING AND SERVICING
• To reduce the emission of harmful substances into the atmos-
phere, clean the appliance (externally, and internally when
necessary) with products featuring over 90% biodegradability.
• Dally wash the stainless steel surfaces with soapy lukewarm
water, rinse thoroughly and dry carefully.
• When cleaning stainless steel do not use detergents containing
abrasive substances as well as shavings, scouring pads, brushes
or scrapers in common steel since ferrous residue of these can
cause rust. Stainless steel wool can be used, wiped in the
direction of the satin finish.
• Daily clean the burners and the holes of the flame protections
from any scales.
• When the appliance remains inoperative for long periods of time,
observe the following precautions:
- close the main gas cock placed upstream from the appliance;
- on all the stainless steel surfaces apply a cloth soaked in
vaseline oil in order to spread a protective film;
- periodically air the premises.
• Periodically (at least once a year) have the appliance totally
checked. For this purpose, it is recommended to draw up a
maintenance contract.
4. WARNINGS
• Do not wash the appliance with water jets.
• Do not use products containing chlorine (bleach, hydrochloric
acid etc.) even diluted, to clean steel surfaces.
• Do not use corrosive substances (i.e.: muriatic acid) to clean
the floor under the appliance.
• Do not modify the aeration supply necessary for combustion.
• When scrapping the appliance, observe all regulations gov-
erning waste disposal in the country of installation.
• Our appliances are manufactured using more than 90 % metal
(stainless steel, iron, aluminium, galvanised sheet metal) and
therefore these may be recycled in conventional waste recov-
ery sites in compliance with current standards in the country of
installation.
• Render the appliance completely inoperative by removing the
power cable and any other closure device (where fitted) to avoid
the risk of persons being trapped inside.
PR 700 - GAS COOKERS
MAIN COMPONENTS
COOKING TOP
• Gas cock
"PINTOSSI"-type, SC-PEL 20 S equipped with gas inlet filter
• Thermocouple
"SIT"-type, mod. 0.290, M8x1 thread
• Main burner
"CZGI"-type
GAS OVEN
• Gas termoststic cock
"PINTOSSI"-type, mod. 25 ST equipped with gas inlet filter
• Pilot burner
"SIT"-type, mod. 0.140
• Thermocouple
"SIT"-type, mod. 0.200, M8x1 thread
• Burner
"Polidoro"-type in stainless steel AISI 430
• Piezoelectric igniter
"INECO"-type, mod. 6000
Comentários a estes Manuais